If you have a Whirlpool bottom freezer refrigerator, you might not pay much attention to how it’s leveled. After all, it seems to work fine as long as it’s plugged in and cold, right? Well, not exactly. Leveling your refrigerator is actually an important step to ensure its proper function and performance. In this post, we’ll show you how to level a Whirlpool bottom freezer refrigerator and why it matters.
To level a Whirlpool bottom freezer refrigerator, you need to check the floor level, adjust the leveling feet, and align the doors. You should level your refrigerator when you install it, when you move it, or when you notice any problems with the doors or the temperature.
The first step is to check the floor level under your refrigerator. The floor should be flat and even, without any bumps or dips. If the floor is not level, you may need to use shims or other materials to raise or lower the refrigerator.
To check the floor level, you can use a carpenter’s level or a smartphone app. Place the level on the top of the refrigerator and see if it’s balanced. If not, mark the areas where the refrigerator needs to be raised or lowered.
The next step is to adjust the leveling feet of your refrigerator. The leveling feet are the small screws or knobs at the bottom of your fridge that can be turned to raise or lower it. Depending on your model, your refrigerator may have two or four leveling feet.
To adjust the leveling feet, you need to unplug the refrigerator and turn off the power at the electrical outlet. Then, remove the lower panel of your fridge and tighten any loose or wobbly screws. Next, use a wrench or a pliers to turn the leveling feet clockwise or counterclockwise until they are in contact with the floor.
The last step is to align the doors of your refrigerator. The doors should be parallel to each other and to the sides of the fridge. They should also close and seal properly without any gaps or frost buildup.
To align the doors, you need to check and adjust the door hinges, gaskets, and magnets. You may need to loosen or tighten some screws or bolts to make sure they are aligned correctly. You can also use a Whirlpool door alignment tool if you have one.
Leveling your refrigerator matters because it affects its performance and efficiency. A leveled refrigerator will have better air circulation, temperature control, and energy consumption. It will also prevent problems such as:
You should level your refrigerator every six months or whenever you notice any of these problems. This will help extend the life of your appliance and keep your food fresh and safe.
Q: How do I know if my Whirlpool bottom freezer refrigerator is leveled?
A: You can use a carpenter’s level or a smartphone app to check if your refrigerator is leveled. Place the level on the top of the fridge and see if it’s balanced. You can also check if the doors are aligned and close properly.
Q: How do I find out which leveling feet I need for my Whirlpool bottom freezer refrigerator?
A: You can find out which leveling feet you need by looking at your owner’s manual or installation instructions. You can also visit www.whirlpool.com/parts to find out which parts are compatible with your model.
Q: Where can I buy a Whirlpool door alignment tool for my Whirlpool bottom freezer refrigerator?
A: You can buy a Whirlpool door alignment tool from www.whirlpool.com/parts or from other authorized retailers online or in-store. Make sure you buy an original or approved tool for your refrigerator to ensure quality and accuracy.
