Why Is My Whirlpool Fridge Not Cooling

A Whirlpool fridge is a reliable appliance that keeps your food and drinks cold and fresh. However, sometimes you may notice that your fridge is not cooling as it should, or even worse, not cooling at all. This can be a frustrating and costly problem, as your food may spoil or go to waste.

Why is my Whirlpool fridge not cooling? There are several possible reasons for this issue, ranging from simple to complex. Some of them you can fix yourself, while others may require professional help. In this post, we’ll go over some of the most common causes for a Whirlpool fridge not cooling and how to troubleshoot them.

The most common causes for a Whirlpool fridge not cooling are dirty condenser coils, blocked air vents, faulty temperature controls, defective door seals, or malfunctioning internal parts.

Dirty condenser coils

Dirty condenser coils are the most common cause for a Whirlpool fridge not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly. This can affect the cooling efficiency of your fridge and make it work harder than necessary¹

To fix this problem, you need to clean your condenser coils regularly. Here are some steps to follow:

• Unplug your fridge or turn off the power supply.
• Locate the condenser coils on the back or bottom of your fridge. You may need to remove a panel or cover to access them.
• Use a vacuum cleaner with a brush attachment to remove any dust or dirt from the coils. Be careful not to damage the coils or bend the fins.
• Use a soft cloth or a damp sponge to wipe off any remaining dirt or grease from the coils.
• Plug in your fridge or turn on the power supply and check if it cools better.

Blocked air vents

Blocked air vents can also prevent your Whirlpool fridge from cooling properly. Air vents allow cold air to circulate inside your fridge and freezer compartments. If the vents are blocked by food items or ice buildup, they can restrict the airflow and cause uneven cooling²

To fix this problem, you need to unblock your air vents and organize your food storage. Here are some steps to follow:

• Locate the air vents in your fridge and freezer compartments. They are usually on the back wall or near the ceiling.
• Remove any food items or containers that are blocking the vents. Leave some space around the vents for proper ventilation.
• If you notice any ice buildup on the vents, defrost your freezer or use a hair dryer to melt it away.
• Arrange your food items in a way that allows cold air to flow freely inside your fridge and freezer.

Faulty temperature controls

Faulty temperature controls can also cause your Whirlpool fridge not cooling issue. Temperature controls allow you to adjust the temperature settings of your fridge and freezer compartments according to your preferences. If the controls are not working properly, they may not sense or regulate the temperature correctly. This can result in your fridge being too warm or too cold³

To fix this problem, you need to check and adjust your temperature controls. Here are some steps to follow:

• Check the temperature display on your control panel. It should show the set point temperature of each compartment.
• If the display is blank or shows an error code, you may have a power outage or a faulty control board. Try unplugging your fridge for a few minutes and plugging it back in. If that doesn’t work, you may need to replace the control board.
• If the display is normal, but the temperature is too warm or too cold, you may need to adjust the temperature settings. Use the (+) or (-) buttons to change the temperature until you reach your desired level.
• Wait 24 hours for your fridge to stabilize at the new temperature settings.

Defective door seals

Defective door seals can also be a reason for your Whirlpool fridge not cooling properly. Door seals are rubber gaskets that seal the gap between the door and the fridge body. They prevent warm air from entering and cold air from escaping your fridge. If the door seals are loose, damaged, or dirty, they can cause air leaks and affect your fridge’s cooling performance⁴

To fix this problem, you need to inspect and replace your door seals if necessary. Here are some steps to follow:

• Check the door seals for any cracks, tears, gaps, or signs of wear and tear.
• Close the door and run your hand along the edge of the seal. Feel for any cold air coming out or warm air coming in.
• Use a dollar bill or a piece of paper to test the seal’s tightness. Insert it between the door and the seal and close the door. Try to pull it out. If it slides out easily, the seal is loose. Repeat this test on different spots along the seal.
• Clean the door seals with a mild soap and water solution and a soft cloth. Remove any dirt or debris that may interfere with the seal’s function.
• If the door seals are damaged or loose, you may need to replace them with new ones. You can order them from Whirlpool or a reputable appliance parts supplier.

Malfunctioning internal parts

Malfunctioning internal parts can also be a cause for your Whirlpool fridge not cooling. There are several components inside your fridge that work together to create and maintain the cooling cycle. These include the compressor, the evaporator fan, the condenser fan, the defrost system, and the thermostat. If any of these parts are faulty or broken, they can disrupt the cooling process and cause your fridge to malfunction⁵

To fix this problem, you need to diagnose and replace the faulty part. This may require some technical skills and tools, so you may want to consult with a professional technician. Here are some steps to follow:

• Unplug your fridge or turn off the power supply.
• Locate the faulty part by following the troubleshooting guide in your owner’s manual or online sources.
• Use a multimeter to test the part for continuity or resistance. If the part shows no continuity or resistance, it is defective and needs to be replaced.
• Order a new part from Whirlpool or a reputable appliance parts supplier.
• Install the new part by following the instructions in your owner’s manual or online sources.
• Plug in your fridge or turn on the power supply and check if it cools better.

Conclusion

A Whirlpool fridge not cooling can be a frustrating problem that can affect your food quality and safety. However, by following the steps above, you can troubleshoot and fix some of the most common causes for this issue. If you need more help or advice, feel free to contact us or schedule a service appointment.

We hope this post has helped you learn why is my Whirlpool fridge not cooling and how to fix it. If you have any questions or comments, feel free to leave them below.