If you have a Whirlpool integrated fridge freezer, you may want to defrost it from time to time to remove any excess ice or frost that may affect its performance, food quality, or energy efficiency. Defrosting a Whirlpool integrated fridge freezer is not a hard task, but it does require some care and attention. In this blog post, we’ll show you how to defrost a Whirlpool integrated fridge freezer and how often to do it.
To defrost a Whirlpool integrated fridge freezer, you need to unplug the appliance, empty the freezer compartment, remove the drain cover and stopper, place a pan or hose under the drain, and let the ice melt naturally. You can also use pans of hot water or a hair dryer to speed up the process. You need to defrost your fridge freezer at least once a year or more frequently if there is more than 1/4 inch of frost build-up.
Defrosting a Whirlpool integrated fridge freezer is not a complicated task, but you’ll need to follow some instructions and precautions. The following steps will guide you through the process of defrosting your fridge freezer and preparing it for use again.
The first thing you need to do before defrosting your fridge freezer is to unplug it from the power source. This will prevent any electric shocks or damage to the appliance. Locate the power cord and pull it out of the wall outlet. Make sure you have enough space and light to work on your appliance.
The next thing you need to do is to empty the freezer compartment of your fridge freezer. Remove all the frozen food items and place them in coolers, another fridge or freezer, or a cool area. You can also wrap them in several layers of newspaper and cover them with a blanket to keep them frozen for several hours.
The next thing you need to do is to remove the drain cover and stopper that are located at the bottom of your freezer compartment. The drain cover is a plastic or metal piece that protects the drain hole from clogging. The stopper is a rubber plug that seals the drain hole.
To remove them, pull out the drain cover by hand or use a flathead screwdriver to pry it off. Then, remove the rubber stopper from inside the drain hole and turn it so that the arrow is pointing downward. This will allow the defrost water to flow out of the drain hole.
The next thing you need to do is to place a pan or hose under the drain hole to collect the defrost water. You can use any large pan or bucket that can fit under your appliance. If your appliance has a drainage hose adapter, you can attach a hose to it and direct the water into a separate drain.
Make sure that you check the pan or hose frequently to avoid water overflow. Have a second pan or hose handy for easier emptying.
The easiest way to defrost your fridge freezer is to let the ice melt naturally. After you have prepared your appliance for defrosting, leave the freezer door open and wait for the ice to melt on its own. This may take several hours depending on how much ice there is.
If you want to speed up the melting process, you can use some of these methods:
The last thing you need to do is to clean and dry your appliance after defrosting it. Wipe off any excess water or ice from your freezer compartment with a towel or sponge. Wash the inside walls with a solution of mild detergent in warm water or two tablespoons of baking soda in one quart of warm water.
Do not use abrasive or harsh cleaners as they may damage your appliance. Rinse well and wipe dry with a clean soft cloth. Replace the drain stopper and cover securely. Plug in your appliance and turn it on. Adjust your temperature settings if needed. Wait for your appliance to cool down before refilling it with food.
You should aim to defrost your Whirlpool integrated fridge freezer at least once a year or more frequently if there is more than 1/4 inch of frost build-up. Frost build-up can affect your appliance’s performance, food quality, and energy efficiency. It can also cause your appliance to work harder and wear out faster.
Some factors that can increase frost build-up are:
You can prevent or reduce frost build-up by following some of these tips:
Q: How do I know if my Whirlpool integrated fridge freezer needs defrosting?
A: You can tell if your Whirlpool integrated fridge freezer needs defrosting by checking the amount of frost or ice on the walls or shelves of your freezer compartment. If there is more than 1/4 inch of frost or ice, you should defrost your appliance. You can also check the temperature of your freezer with a thermometer. If it is higher than 0 – 2 degrees Fahrenheit, you may need to defrost your appliance.
Q: How long does it take to defrost a Whirlpool integrated fridge freezer?
A: The time it takes to defrost a Whirlpool integrated fridge freezer depends on how much ice there is and how you defrost it. If you let the ice melt naturally, it may take several hours. If you use pans of hot water or a hair dryer, it may take less time. You should plan ahead and allow enough time for defrosting and cleaning your appliance.
Q: How do I reset my Whirlpool integrated fridge freezer after defrosting?
A: To reset your Whirlpool integrated fridge freezer after defrosting, you need to plug in your appliance and turn it on. Adjust your temperature settings if needed. Wait for your appliance to cool down before refilling it with food. You may also need to reset the ice maker or water filter if your appliance has them.
Defrosting a Whirlpool integrated fridge freezer is a simple task that can help you keep your appliance in good condition and preserve your food quality. By following our easy guide, you can defrost your fridge freezer in minutes and enjoy a perfect appliance.
