If you’re planning to move or relocate your Kenmore freezer, you might be wondering how much it weighs and how to move it safely. After all, freezers are not exactly lightweight appliances, and you don’t want to risk damaging them or hurting yourself in the process. In this post, we’ll answer these questions and give you some tips on how to move your Kenmore freezer with ease.
The weight of your Kenmore freezer depends on the model, size and type of freezer you have. Generally, upright freezers weigh more than chest freezers, and larger freezers weigh more than smaller ones. For example, the Kenmore 17.9-cu ft Frost-free Upright Freezer (White) weighs about 200 lbs, while the Kenmore 17662 7 cu. ft. Chest Freezer (White) weighs about 100 lbs.
How to Find Out the Weight of Your Kenmore Freezer
The easiest way to find out the weight of your Kenmore freezer is to check the product manual or the label on the back or side of the freezer. You can also visit the Kenmore website and look up your model number to get the specifications and dimensions of your freezer.
If you don’t have access to any of these sources, you can try to estimate the weight of your freezer by using a formula based on its volume and density. The average density of a freezer is about 35 lbs per cubic foot, so you can multiply the cubic feet of your freezer by 35 to get an approximate weight. For example, if your freezer has a capacity of 18 cu. ft., you can estimate that it weighs about 630 lbs (18 x 35 = 630).
However, keep in mind that this is only an estimate and may not be accurate for your specific freezer model. Also, don’t forget to factor in the weight of the food and ice inside your freezer, which can add up to several pounds.
How to Move Your Kenmore Freezer Safely
Moving a freezer is not a one-person job, so make sure you have at least one or two helpers to assist you. You’ll also need some tools and equipment, such as a dolly, straps, blankets, gloves and protective footwear.
Before you start moving your freezer, follow these steps to prepare it:
- Unplug your freezer at least 24 hours before moving it. This will allow the freezer to defrost and prevent any water leakage or damage.
- Empty your freezer of any food and ice. You can either consume, donate or discard the food, or store it in a cooler with ice packs if you’re moving locally.
- Clean your freezer and wipe it dry. Use a mild detergent and a soft cloth to remove any dirt, dust or spills from the interior and exterior of your freezer. Then, wipe it dry with a towel or paper towels.
- Secure the door and cord. Tape or tie the door shut to prevent it from opening during transit. Wrap the cord around the back of the freezer or tape it securely to avoid any tripping hazards.
Once your freezer is ready, follow these steps to move it:
- Use a dolly to transport your freezer. Place a blanket or a sheet under your freezer to protect it from scratches. Then, tilt your freezer slightly and slide the dolly underneath it. Make sure the dolly is centered and balanced under your freezer.
- Strap your freezer to the dolly. Use straps or ropes to secure your freezer to the dolly. Tighten the straps firmly but not too tightly to avoid denting or damaging your freezer.
- Move your freezer carefully. With one person on each side of the dolly, slowly roll your freezer out of your house or apartment. Avoid any bumps, stairs or sharp turns that could cause your freezer to tip over or fall off the dolly.
- Load your freezer into the truck. If possible, use a ramp or a lift gate to load your freezer into the truck. Otherwise, you’ll need at least two people to lift your freezer onto the truck bed. Make sure you lift with your legs and not with your back, and keep your freezer upright at all times.
- Secure your freezer in the truck. Place your freezer in an upright position against the wall of the truck. Use more blankets or pads to cushion your freezer from any shocks or vibrations. Then, use more straps or ropes to tie your freezer to the wall or other heavy items in the truck.
FAQs About Moving Your Kenmore Freezer
Here are some common questions and answers about moving your Kenmore freezer:
- Can I lay my Kenmore freezer on its side? No, you should never lay your Kenmore freezer on its side, as this can damage the compressor, the refrigerant lines and the cooling system. Always keep your freezer upright during moving and storage.
- How long do I have to wait before plugging in my Kenmore freezer after moving it? You should wait at least four hours before plugging in your Kenmore freezer after moving it, to allow the refrigerant and oil to settle back into the compressor. If you laid your freezer on its side by mistake, you should wait at least 24 hours before plugging it in.
- How do I level my Kenmore freezer after moving it? You can level your Kenmore freezer by adjusting the leveling legs or feet at the bottom of your freezer. Use a level or a carpenter’s square to check if your freezer is level from side to side and front to back. A level freezer will ensure optimal performance and prevent any door alignment or sealing issues.
