How To Change The Water Filter In Whirlpool Fridge

If you have a Whirlpool fridge, you may be wondering how to change the water filter and when to do it. The water filter is an important component that helps remove contaminants and improve the taste and quality of your drinking water. In this post, we will show you how to change the water filter in your Whirlpool fridge, depending on the model and filter type. We will also answer some common questions about water filters and their benefits.

The best way to change the water filter in a Whirlpool fridge is to locate the filter, either in the grille or inside the fridge, and replace it with a new one by following the instructions on the filter packaging or the user manual. You should change the water filter every six months or when the indicator light comes on.

Why You Should Change Your Water Filter Regularly

Changing your water filter regularly is not only good for your health, but also for your fridge. Here are some reasons why you should change your water filter every six months or sooner:

• It removes harmful contaminants. The water filter can trap cysts, lead, chlorine, pesticides, and other pollutants that may be present in your tap water. These contaminants can affect the taste, odor, and safety of your water.
• It prevents clogging and damage. Over time, the water filter can get clogged with dirt and debris, reducing the water flow and pressure. This can cause ice maker problems, leaks, and damage to your fridge components.
• It saves money and energy. By changing your water filter regularly, you can avoid buying bottled water or using a separate water filtration system. You can also reduce the energy consumption of your fridge by improving its efficiency and performance.

How To Change The Water Filter In A Whirlpool Fridge

The process of changing the water filter in a Whirlpool fridge may vary depending on the model and filter type. However, there are some general steps that you can follow:

• Turn off the power to the fridge. Unplug the refrigerator and turn off the power at the electrical outlet. This will prevent any electric shocks or accidents while you are changing the filter.
• Locate the water filter. The water filter may be located in different places depending on your fridge model. Some common locations are:
  • In the grille: The filter may be in the bottom front grille of your fridge. You may need to unscrew a color-keyed cap from the old filter and transfer it to the new one.
  • Inside the fridge: The filter may be in the upper right-hand corner inside your fridge. You may need to pull open a filter door or turn a handle to access it.
• Remove the old filter. Depending on your filter type, you may need to:
  • Turn it counterclockwise: Some filters have a quarter-turn design that allows you to remove them by turning them counterclockwise until they release.
  • Unscrew the handle: Some filters have a screw-on design that requires you to unscrew the handle from the old filter and attach it to the new one.
  • Slide it out: Some filters have a push-button design that lets you slide them out of their slot by pressing a button.
• Discard the old filter. Dispose of the old filter properly according to local regulations. Do not reuse or recycle it.
• Install the new filter. Open your new filter and remove any protective coverings from the O-rings. Make sure they are still in place after removing them. Then, depending on your filter type, you may need to:
  • Turn it clockwise: Some filters have a quarter-turn design that allows you to install them by aligning them with the grooves and turning them clockwise until they lock.
  • Screw on the handle: Some filters have a screw-on design that requires you to screw on the handle to the new filter before inserting it into its slot.
  • Slide it in: Some filters have a push-button design that lets you slide them into their slot until they click into place.
• Close the filter door or cap. Make sure the filter door or cap is closed securely so it snaps into place.
• Turn on the power to the fridge. Plug in the refrigerator and turn on the power at the electrical outlet.
• Flush the new filter. Run four gallons of water through the dispenser or ice maker to flush out any air bubbles or carbon dust from the new filter. This will also reset the indicator light if your fridge has one.
• Enjoy fresh and clean water. You can now enjoy fresh and clean water from your Whirlpool fridge for up to six months or until the indicator light comes on again.

FAQs About Changing The Water Filter In A Whirlpool Fridge

Here are some frequently asked questions about changing the water filter in a Whirlpool fridge:

• What kind of water filter do I need for my Whirlpool fridge? You need to use the water filter that is compatible with your fridge model and filter type. You can find the filter number on the old filter or in the user manual. You can also use the Whirlpool water filter finder to find the right filter for your fridge.
• How do I know when to change the water filter in my Whirlpool fridge? You should change the water filter in your Whirlpool fridge every six months or when the indicator light comes on. The indicator light may be located on the dispenser, on the control panel, or inside the fridge. It may be red, green, or blue depending on your fridge model. You can also check the water quality and taste to see if the filter needs to be changed.
• What happens if I don’t change the water filter in my Whirlpool fridge? If you don’t change the water filter in your Whirlpool fridge, you may experience reduced water flow and pressure, ice maker problems, leaks, and damage to your fridge components. You may also drink contaminated water that has a bad taste and odor.

Conclusion

Changing the water filter in your Whirlpool fridge is a simple and important task that can improve your health and your fridge performance. By following the steps above, you can easily change the water filter in your Whirlpool fridge depending on the model and filter type. You should change the water filter every six months or when the indicator light comes on. If you have any questions or concerns about changing the water filter in your Whirlpool fridge, you can contact Whirlpool customer service or consult a professional.