How To Move An Upright Kenmore Freezer Safely And What To Consider

If you are planning to move an upright Kenmore freezer to a new home or location, you may be wondering how to do it safely and efficiently. Upright freezers are large and heavy appliances that require careful handling and preparation to avoid damage or injury. In this post, we will show you how to move an upright Kenmore freezer safely and what to consider before, during, and after the move.

To move an upright Kenmore freezer safely, you need to empty and defrost the freezer, disconnect and secure the power cord, wrap and protect the freezer with moving blankets, load and transport the freezer with an appliance dolly, and install and level the freezer in the new place.

How to Move an Upright Kenmore Freezer Safely

The process of moving an upright Kenmore freezer safely may vary depending on the model and features of your freezer. You should always refer to the label or manual of your specific freezer model for more accurate information and instructions. However, here are some general steps that you can follow to move an upright Kenmore freezer safely:

Before the Move

Before moving your upright Kenmore freezer, you need to prepare it for the move by doing the following things:

1. Empty the freezer. Remove all the items in the freezer and store them in another freezer or a well-insulated cooler with ice packs. You may also want to use this opportunity to discard any expired or unwanted food.
2. Defrost the freezer. Depending on your model and features of your freezer, you may need to defrost it manually or automatically. To defrost it manually, unplug the freezer and leave the door open until all the ice melts. To defrost it automatically, use the defrost function on the control panel or consult your manual for instructions. In either case, place some towels or trays under the freezer to catch any dripping water.
3. Clean and dry the freezer. Once all the ice has melted, wipe down the interior of the freezer with a mild soap and water solution or vinegar. Rinse with clean water and dry with a soft cloth.
4. Disconnect and secure the power cord. Unplug the power cord from the wall outlet and wrap it with tape or a rubber band. Then, tuck it behind or under the freezer to prevent it from dangling or getting caught during the move.
5. Wrap and protect the freezer with moving blankets. Cover the entire surface of the freezer with moving blankets or furniture pads and secure them with tape or rope. This will protect the freezer from scratches, dents, or dirt during the move.

During the Move

During moving your upright Kenmore freezer, you need to load and transport it safely by doing the following things:

1. Get an appliance dolly and some helpers. An appliance dolly is a special type of hand truck that has straps and wheels that can handle heavy loads. You will need one to move your upright Kenmore freezer without straining your back or damaging your floors. You will also need at least two strong helpers to assist you with lifting and maneuvering the freezer.
2. Load the freezer onto the appliance dolly. Tilt the freezer slightly forward and slide the appliance dolly under it. Then, strap the freezer securely to the appliance dolly using ratchet straps or rope. Make sure that nothing is loose or wobbly on the dolly.
3. Take the freezer out of the house. Carefully roll the appliance dolly with the freezer out of your house through a wide door or hallway. Avoid any bumps, stairs, or sharp turns that could cause instability or damage to your freezer or property.
4. Load the freezer into a moving truck or trailer. Use a loading ramp if available to roll the appliance dolly with the freezer into a moving truck or trailer. Position the freezer upright against a wall or in a corner and secure it with more straps or rope to prevent it from shifting during transit.

After The Move

After moving your upright Kenmore freezer, you need to install and level it in your new place by doing these things:

1. Unload The Freezer From The Moving Truck Or Trailer Use a loading ramp if available to roll The Appliance Dolly With The Freezer Out Of The Moving Truck Or Trailer Carefully Roll The Appliance Dolly With The Freezer Into Your New House Through A Wide Door Or Hallway Avoid Any Bumps Stairs Or Sharp Turns That Could Cause Instability Or Damage To Your Freezer Or Property
2. Unload The Freezer From The Appliance Dolly Unstrap The Freezer From The Appliance Dolly And Tilt It Slightly Forward Slide The Appliance Dolly Out From Under The Freezer And Set It Aside Lower The Freezer Gently Onto The Floor
3. Install And Level The Freezer In The New Place Choose A Suitable Location For Your Freezer That Is Away From Heat Sources Direct Sunlight Or Moisture Plug The Power Cord Into A Grounded Wall Outlet And Make Sure It Is Not Pinched Or Stretched Adjust The Leveling Legs Of The Freezer With A Wrench Or Pliers To Make Sure It Is Even And Stable Use A Carpenter’s Level To Check The Horizontal And Vertical Alignment Of The Freezer
4. Wait Before Turning On The Freezer Wait At Least 30 Minutes Before Turning On The Freezer To Allow The Oil And Refrigerant To Settle In The Compressor Turn On The Temperature Control Knob To Your Desired Setting And Wait For At Least 4 Hours For The Freezer To Reach Its Optimal Temperature Reload The Freezer With Your Food Items And Organize Them In An Efficient Way

What to Consider When Moving an Upright Kenmore Freezer

When moving an upright Kenmore freezer, you should consider the following things:

• The size and weight of your freezer. You should measure the dimensions and weight of your freezer and compare them with the available space and capacity of your moving truck or trailer. You should also make sure that your freezer can fit through the doors and hallways of your old and new place.
• The type and amount of food in your freezer. You should plan ahead and use up or donate as much of the food in your freezer as possible before the move. You should also pack any remaining food in a cooler with ice packs and transport it separately from the freezer.
• The condition and age of your freezer. You should inspect your freezer for any signs of damage or malfunction before the move. You should also check the warranty and service records of your freezer and decide if it is worth moving or replacing.
• The cost and safety of moving your freezer. You should weigh the pros and cons of moving your freezer yourself or hiring professional movers. You should also follow some basic safety rules to prevent injury or damage to yourself, your freezer, or your property.

FAQs

Q: Can I lay my upright Kenmore freezer on its side to move it?

A: It is not recommended to lay your upright Kenmore freezer on its side to move it, as this can cause damage to the compressor, oil, and refrigerant system. However, if you have no other choice, you can do so with some precautions. You should tape the doors closed and wrap the freezer in a heavy blanket. You should also keep the freezer on its side for as little time as possible and wait at least 24 hours before turning it on.

Q: How often should I defrost my upright Kenmore freezer?

A: The frequency of defrosting your upright Kenmore freezer depends on the model and features of your freezer. Some models have a frost-free or automatic defrost feature that prevents ice buildup and eliminates the need for manual defrosting. Other models require manual defrosting every few months or whenever you notice more than 1/4 inch of frost or ice buildup on the walls or coils of your freezer.

Q: How do I clean my upright Kenmore freezer?

A: To clean your upright Kenmore freezer, you should first unplug it and remove all the food items. Then, you should wipe down the interior of the freezer with a mild soap and water solution or vinegar. Rinse with clean water and dry with a soft cloth. You can also remove any shelves or drawers and wash them separately with warm water and dish soap. Dry them thoroughly before putting them back.

Conclusion

Moving an upright Kenmore freezer can be a challenging task that requires careful preparation and handling. To move an upright Kenmore freezer safely, you need to empty and defrost the freezer, disconnect and secure the power cord, wrap and protect the freezer with moving blankets, load and transport the freezer with an appliance dolly, and install and level the freezer in the new place. You should also consider the size, weight, condition, age, cost, and safety of moving your freezer.