If you have a Whirlpool fridge, you may need to remove and replace the shelves for cleaning or organizing purposes. The shelves are designed to slide in and out of the fridge easily, but sometimes they can get stuck or misaligned. In this blog post, we will show you how to put shelves back in Whirlpool fridge in a few simple steps.
To put shelves back in Whirlpool fridge, you need to remove items from the shelf, slide the shelf out to the stop, lift the back or front of the shelf past the stop, and slide the shelf out the rest of the way. Then, replace the shelf by sliding the back of the shelf into the track in the wall of the cabinet and guiding the front of the shelf into the shelf track.
Why You Should Put Shelves Back In Whirlpool Fridge
Putting shelves back in Whirlpool fridge is not only a matter of aesthetics, but also of functionality and hygiene. Here are some of the reasons why you should put shelves back in Whirlpool fridge properly:
- It improves your fridge’s storage capacity. When the shelves are in their correct position, they can hold more items and keep them organized. You can also adjust the height or position of the shelves according to your needs.
- It prevents food contamination and spoilage. When the shelves are out of place, they can create gaps and openings that allow air and bacteria to enter the fridge. This can affect the quality and safety of your food and cause unpleasant odors.
- It extends your fridge’s lifespan. When the shelves are not aligned, they can cause friction and damage to the fridge’s interior parts. This can lead to malfunctions and repairs that can shorten your fridge’s lifespan.
How Often You Should Put Shelves Back In Whirlpool Fridge
The frequency of putting shelves back in Whirlpool fridge depends on how often you use them and how dirty they get. As a general rule of thumb, you should put shelves back in Whirlpool fridge whenever you notice that they are loose, crooked, or hard to open or close.
You should also put shelves back in Whirlpool fridge after cleaning them. You can clean the shelves with a mild soap and water solution and dry them with a clean towel. You should also clean the inside of the fridge with the same solution and wipe off any spills or stains.
How To Put Shelves Back In Whirlpool Fridge Step By Step
Putting shelves back in Whirlpool fridge is not a complicated task, but it does require some care and attention. Here are the steps you need to follow:
- Remove items from the shelf. This will give you more space and visibility to work with the shelf.
- Slide the shelf out to the stop. You can do this by grasping both sides of the shelf and sliding it outwards until it stops.
- Lift the back or front of the shelf past the stop, depending on your model. You can do this by lifting up the back or front edge of the shelf slightly and pulling it towards you until it comes out of the shelf supports.
- Slide the shelf out the rest of the way. You can do this by pulling it out completely from its slot.
- Replace the shelf by sliding the back of the shelf into the track in the wall of the cabinet. You can do this by aligning the rear hooks of the shelf with the slots in the track and sliding them in.
- Guide the front of the shelf into the shelf track. You can do this by tilting up or down (depending on your model) the front edge of the shelf until it drops into the shelf track. 7. Lower the front of the shelf and make sure that the shelf is in position. You can do this by pushing down or up (depending on your model) the front edge of the shelf until it snaps into place. 8. Repeat steps 1 to 7 for any other shelves that need to be put back in Whirlpool fridge. 9. Replace all items on the shelves and close the refrigerator door. Your fridge should now look neat and tidy.
