How To Replace The Ice Maker In Your Kenmore Bottom Freezer Refrigerator

If you have a Kenmore bottom freezer refrigerator with an ice maker, you might be wondering how to replace it if it stops working or malfunctions. Replacing the ice maker is not a difficult task, but it does require some basic tools and skills. In this blog post, we will show you how to replace the ice maker in your Kenmore bottom freezer refrigerator in a few simple steps. The replacement process involves unplugging the fridge, removing the ice bucket, sliding out the old ice maker, detaching the wire harness, attaching the new ice maker, and plugging in the wire harness.

Why You Might Need To Replace The Ice Maker

There are several reasons why you might need to replace the ice maker in your Kenmore bottom freezer refrigerator. Some of the common problems that can affect the ice maker are:

• Ice maker not making ice or making too little ice
• Ice maker leaking water or overflowing
• Ice maker making noisy or clumping ice
• Ice maker not dispensing ice or dispensing too much ice

These problems can be caused by various factors, such as a faulty water valve, a clogged water filter, a frozen water line, a broken thermostat, a damaged motor, or a worn-out ice mold. Some of these issues can be fixed by troubleshooting and repairing the ice maker components, but others might require replacing the entire ice maker assembly.

How To Replace The Ice Maker In Your Kenmore Bottom Freezer Refrigerator

Before you start replacing the ice maker in your Kenmore bottom freezer refrigerator, make sure you have the following tools and parts ready:

• A new ice maker assembly that is compatible with your fridge model
• A ¼ inch nut driver
• A flat blade screwdriver
• A pair of needle nose pliers

You can find the new ice maker assembly online or at your local appliance store. You can also check the part number on your old ice maker to make sure you get the right one.

Once you have everything ready, follow these steps to replace the ice maker in your Kenmore bottom freezer refrigerator:

1. Unplug the fridge and open the freezer compartment to take out the ice bucket.
2. Loosen the mounting screws that hold the ice maker to the inside wall of the freezer. You might need to use a flat blade screwdriver to pry off the plastic cover that hides the screws.
3. Slide out the old ice maker from the metal cradle and detach the wire harness plug from the side of the mounting plate. You might need to use needle nose pliers to release the plastic locking tabs on the plug.
4. Position the new ice maker in the metal cradle and push the wire harness plug into the side of the mounting plate until it snaps into place.
5. Line up the screw holes on the bottom of the metal cradle and insert the screws. Tighten them just past hand tight.
6. Replace the plastic cover over the screws and put back the ice bucket in place.
7. Plug in the fridge and wait for a few hours for the ice maker to start making ice.

FAQs About Replacing The Ice Maker In Your Kenmore Bottom Freezer Refrigerator

Here are some frequently asked questions about replacing the ice maker in your Kenmore bottom freezer refrigerator:

Q: How do I know if my ice maker is broken or just needs cleaning?

A: If your ice maker is not making any ice at all, or if it is making very small or irregular-shaped ice cubes, it might be broken and need replacing. However, if your ice maker is making dirty or cloudy ice cubes, or if it has a bad odor or taste, it might just need cleaning. You can clean your ice maker by following these steps:

• Turn off the water supply to the fridge and unplug it from the power outlet.
• Remove the ice bucket and dump out any remaining ice cubes.
• Use a soft cloth dampened with warm water and vinegar to wipe down the inside of the ice maker and its components.
• Rinse with clean water and dry with a soft cloth.
• Replace the ice bucket and plug in the fridge.
• Turn on the water supply and wait for a few cycles for fresh ice to be made.

Q: How often should I replace my water filter that serves my ice maker?

A: The water filter that serves your ice maker should be replaced every six months or sooner if you notice a decrease in water flow or quality. To replace your water filter, follow these steps:

• Locate the water filter at the left side of the grille at the bottom of your fridge and press the button next to it to pop it out slightly.
• Pull out the old water filter and discard it.
• Remove any protective caps from the new water filter and insert it into the slot until it clicks into place.
• Push the water filter back into the grille until it is flush with the surface.
• Run water through the dispenser for a few minutes to flush out any air and debris from the system.

Q: How do I adjust the ice maker settings on my Kenmore bottom freezer refrigerator?

A: You can adjust the ice maker settings on your Kenmore bottom freezer refrigerator by using the control panel on the door of your fridge. You can change the following settings:

• Ice size: You can choose between small, medium, or large ice cubes by pressing the ice size button until the desired size is displayed.
• Ice level: You can choose between low, medium, or high ice level by pressing the ice level button until the desired level is displayed. This will determine how much ice is stored in the ice bucket.
• Ice off: You can turn off the ice maker by pressing and holding the ice off button for three seconds. A red light will indicate that the ice maker is off. To turn it back on, press and hold the button again for three seconds.

Conclusion

Replacing the ice maker in your Kenmore bottom freezer refrigerator is not a complicated task, but it does require some basic tools and skills. By following the steps in this blog post, you can replace your ice maker in less than an hour and enjoy fresh and cold ice cubes again. If you have any questions or concerns about replacing your ice maker, feel free to contact us at PressToCook.com. We are here to help you with all your kitchen appliance and food safety needs.