You have a Panasonic inverter microwave, and you love it. It’s a posho wosho appliance that can cook, reheat, and defrost your food with precision and efficiency. It’s a smart device that can adjust the power level and cooking time according to the food type and size. It’s a reliable partner that always delivers the best results.
Until it doesn’t.
One day, you try to use your Panasonic inverter microwave, but nothing happens. The microwave will not start at all. You can’t cook, reheat, or defrost anything. You can’t even set the clock or the timer.
What do you do?
Don’t panic. There are some simple steps you can take to fix your Panasonic inverter microwave and make it start again. In this guide, we will show you how to troubleshoot and repair your microwave in 3 easy steps. We will also answer some frequently asked questions about Panasonic inverter microwaves and their starting problems.
So, if you are ready to get your microwave back to work, keep reading!
The first thing you need to do is to check the power source of your microwave. Make sure it is plugged in properly and securely into a working outlet. Sometimes, the plug can get loose or the outlet can get tripped or damaged.
If the plug and the outlet are fine, check the fuse or the circuit breaker of your microwave. If they are blown or tripped, replace or reset them accordingly.
If the power source is not the problem, move on to the next step.
The next thing you need to check is the door switch of your microwave. The door switch is a safety device that prevents the microwave from operating when the door is open. If the door switch is faulty or misaligned, it can prevent the microwave from starting.
To check the door switch, you need to use a multimeter or a continuity tester. You need to unplug the microwave and remove the cabinet to access the door switch. Then, you need to test the switch for continuity while pressing and releasing it.
If the switch does not show continuity when pressed and shows continuity when released, it means it is working properly. If not, it means it is defective and needs to be replaced.
If the door switch is not the problem, move on to the next step.
The thermal fuse is another component of your microwave that works as a safety device. The thermal fuse is a metal wire that melts when the microwave overheats or short circuits. If the thermal fuse is blown, it can cause your microwave to not start.
To check the thermal fuse, you need to use a multimeter or a continuity tester. You need to unplug the microwave and remove the cabinet to access the thermal fuse. Then, you need to test the fuse for continuity by touching its terminals with the probes of your tester.
If the fuse shows continuity, it means it is working properly. If not, it means it is blown and needs to be replaced.
If none of these steps solve your problem, you might need to contact a professional technician or Panasonic’s customer service for further assistance.
Here are some frequently asked questions and answers about Panasonic inverter microwave will not start that you might find helpful:
Q: How do I reset my Panasonic inverter microwave?
A: To reset your Panasonic inverter microwave, you need to unplug it from the power source for at least 10 seconds and then plug it back in. This will clear any errors or glitches that might cause your microwave to not start.
Q: How do I clean my Panasonic inverter microwave?
A: To clean your Panasonic inverter microwave, you need to wipe the inside and outside of your microwave with a damp cloth or sponge and some mild soap or vinegar. Avoid using abrasive cleaners or scouring pads that could scratch or damage the surface. You can also use a microwave-safe bowl filled with water and lemon juice and heat it for a few minutes to remove any odors or stains.
Q: How do I lock or unlock my Panasonic inverter microwave?
A: To lock or unlock your Panasonic inverter microwave, you need to press and hold the stop/cancel button for 3 seconds until you hear a beep. This will activate or deactivate the child safety lock feature that prevents unauthorized access or operation of your microwave.
Q: How do I set the clock on my Panasonic inverter microwave?
A: To set the clock on your Panasonic inverter microwave, you need to press the clock button and enter the current time using the number buttons. Then press the clock button again to confirm.
Q: How do I use the inverter technology on my Panasonic inverter microwave?
A: To use the inverter technology on your Panasonic inverter microwave, you need to select one of the inverter modes on your control panel. These modes include sensor cook, sensor reheat, turbo defrost, keep warm, popcorn, quick min, and more/less. These modes will automatically adjust the power level and cooking time according to the food type and size. This will ensure even and consistent heating and prevent overcooking or undercooking.
Panasonic inverter microwave will not start is a common problem that can have various causes and solutions. In this guide, we showed you how to fix it in 3 easy steps by checking and replacing some of the parts of your microwave.
We hope this guide was helpful and informative for you. If you have any questions or comments, feel free to leave them below. And if you liked this guide, don’t forget to share it with your friends and family who might also have a Panasonic inverter microwave will not start problem.
