How To Replace The Condenser Fan Motor In A Frigidaire Freezer

If your Frigidaire freezer is not cooling properly, making loud noises, or running constantly, you might have a problem with the condenser fan motor. The condenser fan motor is the part that cools the condenser coil, which is located at the bottom of the freezer, behind the back panel. The condenser coil is responsible for releasing the heat from the refrigerant that circulates through the freezer. If the condenser fan motor fails, the condenser coil can overheat and cause the freezer to malfunction.

The condenser fan motor is a cylindrical device that has a fan blade attached to one end and a wire connector on the other end. To replace it, you need to remove the back panel of the freezer, disconnect the wire connector, unscrew or unclip the old motor, and install the new one in reverse order.

In this post, we’ll show you how to replace the condenser fan motor in your Frigidaire freezer in a few easy steps. We’ll also explain why it’s important to replace it, and what to do if you encounter any problems or difficulties. Let’s get started!

Why should you replace the condenser fan motor in your Frigidaire freezer?

The condenser fan motor is an essential part of your Frigidaire freezer, as it helps to keep the condenser coil cool and efficient. If the condenser fan motor fails, it can cause several issues with your freezer, such as:

• Poor cooling or freezing performance.
• Excessive frost or ice buildup on the evaporator coil or fan.
• Increased energy consumption and bills.
• Damage to other components, such as the compressor or the main control board.

Therefore, it’s important to replace the condenser fan motor in your Frigidaire freezer as soon as possible, preferably before it causes more serious problems.

How to replace the condenser fan motor in your Frigidaire freezer safely and easily

Before you attempt to replace the condenser fan motor in your Frigidaire freezer, make sure you have the following tools and materials ready:

• A Phillips head screwdriver or a similar tool that can fit the screws that hold the back panel and the motor in place.
• A pair of gloves to protect your hands from sharp edges or cold surfaces.
• A new condenser fan motor that matches your Frigidaire model. You can order one from Frigidaire or other online retailers that sell refrigerator and freezer parts. The part number for the motor is 5303918774.

Once you have everything ready, follow these steps to replace the condenser fan motor in your Frigidaire freezer:

1. Unplug your Frigidaire freezer from the power outlet and open the door.
2. Remove any items from the bottom shelf of the freezer and set them aside.
3. Locate the back panel of the freezer compartment. It should be a metal plate that covers the lower part of the back wall of the freezer.
4. Use your screwdriver to remove the screws that hold the back panel in place. There should be four screws on each corner of the panel.
5. Pull out the back panel and set it aside.
6. Locate the condenser fan motor on the bottom right corner of the freezer compartment. It should be a cylindrical device that has a fan blade attached to one end and a wire connector on the other end.
7. Disconnect the wire connector from the old motor by pulling it out gently. You might need to use a screwdriver or a similar tool to help you pry it out.
8. Identify how the old motor is attached to the bracket that holds it in place. It could be either screwed or clipped in place. If it’s screwed, you’ll see two screws on each side of the motor. If it’s clipped, you’ll see two plastic tabs on each side of the motor.
9. Put on your gloves and use your screwdriver to unscrew or unclip the old motor from the bracket. Be careful not to damage the bracket or any other parts of your freezer while removing it.
10. Pull out the old motor and discard it properly.
11. Align the new motor with the bracket and push it in until it snaps into place. You might need to use a screwdriver or a similar tool to help you push it in.
12. Connect the wire connector to the new motor by pushing it in firmly until it clicks into place.
13. Check that the new motor is secure and stable.
14. Replace the back panel and secure it with screws.
15. Plug in your Frigidaire freezer and close the door.

Congratulations! You have successfully replaced the condenser fan motor in your Frigidaire freezer. Now you can enjoy better cooling and freezing performance from your freezer.

FAQs about replacing the condenser fan motor in your Frigidaire freezer

Here are some common questions that Frigidaire owners have about replacing the condenser fan motor in their freezer:

• What if I can’t find the condenser fan motor in my Frigidaire freezer?

If you can’t find the condenser fan motor in your Frigidaire freezer, it could mean that either:

• Your model doesn’t have one, as some newer models don’t use condenser fans anymore.
• Your model has a different location or configuration for the condenser fan motor, such as on the back or the bottom of the freezer.
• Your model has a different part number or name for the condenser fan motor, such as a compressor fan motor or a cooling fan motor.

In any case, you can check your owner’s manual or contact Frigidaire for more information about your specific model.

• What if I break or damage the condenser fan motor while replacing it?

If you break or damage the condenser fan motor while replacing it, don’t panic. It’s not a vital part of your freezer, and breaking or damaging it won’t affect its function or performance. Just make sure you don’t damage any other parts of your freezer, such as the condenser coil or fan, while replacing it.

• What if I forget to replace the condenser fan motor in my Frigidaire freezer?

If you forget to replace the condenser fan motor in your Frigidaire freezer, you might notice some problems with your freezer, such as:

• Poor cooling or freezing performance.
• Excessive frost or ice buildup on the evaporator coil or fan.
• Increased energy consumption and bills.
• Damage to other components, such as the compressor or the main control board.

If you notice any of these signs, check your freezer for the condenser fan motor and replace it as soon as possible. If you don’t replace it within a reasonable time, you might also void your warranty, so don’t delay.

Conclusion

The condenser fan motor is a part that cools the condenser coil, which is located at the bottom of the freezer compartment. The condenser coil is responsible for releasing the heat from the refrigerant that circulates through the freezer. If the condenser fan motor fails, the condenser coil can overheat and cause the freezer to malfunction.

Replacing the condenser fan motor in your Frigidaire freezer is not a difficult task, as long as you have the right tools and follow some simple steps. All you need is a screwdriver, a pair of gloves, and a new condenser fan motor that matches your Frigidaire model. Just disconnect the wire connector from the old motor, unscrew or unclip it from the bracket, and install the new one in reverse order.

We hope this post has helped you understand how to replace the condenser fan motor in your Frigidaire freezer, why it’s important to do so, and what to do if you encounter any problems or difficulties. If you have any questions or comments, feel free to leave them below. Happy freezing!