reset-kenmore-freezer-after-a-power-outage

How To Reset Your Kenmore Freezer After A Power Outage And What To Check

A power outage can be a frustrating and inconvenient event that can affect your home appliances, especially your freezer. If you have a Kenmore freezer, you may need to reset it after a power outage to restore its normal function and performance. In this post, we will show you how to reset your Kenmore freezer after a power outage and what to check for potential problems.

To reset your Kenmore freezer after a power outage, you can either press the Alarm Reset button on the control panel or unplug the freezer for a few minutes and plug it back in. You should also check the temperature settings, the door seal, the food quality, and the error codes on the display.

How To Reset Your Kenmore Freezer By Pressing The Alarm Reset Button

One of the easiest ways to reset your Kenmore freezer after a power outage is to press the Alarm Reset button on the control panel. This button is usually located on the inside of the freezer door or on the top of the freezer. Pressing this button will clear any error codes that may have been triggered by the power outage and reset the freezer to its normal operation.

Here are the steps to follow:

  • Locate the Alarm Reset button on your Kenmore freezer. It may look like a bell icon or have the word “Alarm” on it.
  • Press and hold the Alarm Reset button for about three seconds until you hear a beep or see the display change.
  • Release the button and check if the freezer is working properly. You may need to adjust the temperature settings to your desired level.

This method should work for most Kenmore freezers, but if your freezer has a different control panel or does not have an Alarm Reset button, you may need to try another method.

Small Upright Freezers - Kenmore Elite 20.6 cu. ft. Upright Freezer Stainless Steel

How To Reset Your Kenmore Freezer By Unplugging It

Another way to reset your Kenmore freezer after a power outage is to unplug it from the power outlet for a few minutes and plug it back in. This will reset the appliance and hopefully clear any error codes that may be causing the issue. In some cases, you may also need to reset the circuit breaker.

Here are the steps to follow:

  • Remove all the food from the freezer and place it in a cooler or on the kitchen counter.
  • Open the door and prop it open with a towel or something similar. This will prevent the formation of mold and mildew while the freezer is unplugged.
  • Unplug the freezer from the outlet and wait for at least five minutes before plugging it back in.
  • Turn on the freezer and adjust the temperature settings to your desired level.

This method should work for most cases, but if your freezer is still not working properly after taking these steps, you may need to call a repair technician for further assistance.

What To Check After Resetting Your Kenmore Freezer

After resetting your Kenmore freezer, you should also check some things to make sure that everything is working properly and that your food is safe. Here are some things to check:

  • Check the temperature settings. Make sure that your freezer is set to the optimal temperature range of 0°F to 5°F (-18°C to -15°C). You can use a thermometer to verify the temperature inside the freezer.
  • Check the door seal. Make sure that your freezer door is closing tightly and that there are no gaps or cracks in the seal. A loose or damaged door seal can cause cold air to escape and warm air to enter, affecting the cooling efficiency and food quality.
  • Check the food quality. Make sure that your food is still frozen and safe to eat. If you notice any signs of thawing, such as ice crystals, softness, or discoloration, you may need to discard some or all of your food. You can also check this chart from FoodSafety.gov for more guidance on how long frozen food can last after a power outage.
  • Check the error codes. Make sure that there are no error codes on your freezer display that indicate a problem with your appliance. Some common error codes for Kenmore freezers are:
    • CE: Communication error between main board and display board
    • ER: Temperature sensor error
    • FF: Freezer fan error
    • dF: Defrost error
    • OF: Power failure

If you see any of these error codes on your freezer display, you may need to reset your freezer again or call a technician for help.

Kenmore Upright Freezer 13.7 cu. ft. 26458 - Sears

FAQs

Q: How long can my Kenmore freezer keep food frozen after a power outage?

A: According to FoodSafety.gov, a full freezer can keep food frozen for about 48 hours if the door remains closed, while a half-full freezer can keep food frozen for about 24 hours. However, this may vary depending on factors such as ambient temperature, door opening frequency, and freezer size and model.

Q: How can I prevent my Kenmore freezer from losing power?

A: You can prevent your Kenmore freezer from losing power by using a surge protector or a backup generator. A surge protector can protect your freezer from power surges that can damage its components, while a backup generator can provide power to your freezer in case of a power outage.

Q: How can I tell if my Kenmore freezer is working properly?

A: You can tell if your Kenmore freezer is working properly by checking its performance, display, and sound. If your freezer is cooling properly, has no error codes, and is making normal noises, it is likely working properly. However, if you notice any problems with your freezer, such as lack of cooling, error codes, or strange noises, you may need to reset it or call a technician for help.

Conclusion

Resetting your Kenmore freezer after a power outage can be an easy way to fix some common issues with your appliance. You can either press the Alarm Reset button on the control panel or unplug the freezer for a few minutes and plug it back in. You should also check the temperature settings, the door seal, the food quality, and the error codes on the display after resetting your freezer.

Meet

Dale

Dale is the founder and appliance expert behind PressToCook.com. He is a former restaurant manager who has spent years behind the scenes using just about every kitchen appliance imaginable.

He founded PressToCook.com to debunk the myths around appliances and show home cooks how to truly harness the power of their gadgets to whip up incredible dishes easily and efficiently.

Dale is on a mission to prove that kitchen appliances should be celebrated, not feared, and he can’t wait to share his real-world tips and tricks with you!
© 2024 PressToCook.com. All rights reserved.

Site built by LaowaiSites