Blinded by the glaring filter light on your Samsung microwave? Tired of that annoying notification disrupting your popcorn nights? We’ve all forgotten to clean the grease filter and reset the warning light at some point. But no more stumbling around with microwaved meals under a blinking filter alert!
With these tips, you can say goodbye to glare and get back to reheating leftovers in peace. We’ll explain exactly how to locate the filter, access the reset button, and clear the notification light. No need to unplug, disassemble or call in a technician! Just a few button presses will mute that reminder for good.
To reset the filter light on a Samsung microwave, press and hold the 0 button for 3 seconds. The light will turn off and the filter timer will reset.
Why do you need to reset the filter light on a Samsung microwave?
The filter light on a Samsung microwave is not an indicator of the actual condition of the filter. It is a timer that counts the number of hours that the microwave has been used since the last filter reset. The light will turn on after 300 hours of use, or about every 6 months, depending on how often you use your microwave.
The purpose of the filter light is to remind you to check and clean or replace the grease filter regularly. The grease filter is located behind the vent grille on the bottom of the microwave. It traps the grease, smoke, and odors from your cooking and prevents them from clogging the fan and ducts.
If you neglect to clean or replace the grease filter, it can reduce the airflow and efficiency of your microwave. It can also cause unpleasant smells and fire hazards. Therefore, it is important to reset the filter light after you have cleaned or replaced the grease filter, so that you can keep track of when to do it next.
How to clean or replace the grease filter on a Samsung microwave?
Before you reset the filter light on your Samsung microwave, you need to clean or replace the grease filter first. Here are the steps to do so:
- Unplug the microwave from the power outlet or turn off the circuit breaker.
- Open the microwave door and locate the vent grille on the bottom of the microwave.
- Remove the vent grille by pushing it to the left and pulling it out.
- Slide out the grease filter from behind the vent grille.
- Check the condition of the grease filter. If it is dirty, you can clean it with hot water and soap or detergent. You can also soak it in vinegar or baking soda solution to remove stubborn grease. Rinse and dry the filter thoroughly before reinstalling it.
- If the grease filter is damaged or worn out, you need to replace it with a new one. You can order a replacement filter online or from a Samsung authorized service center.
- Slide in the grease filter behind the vent grille and make sure it is securely in place.
- Reattach the vent grille by aligning it with the slots on the bottom of the microwave and pushing it to the right until it snaps into place.
- Plug in the microwave or turn on the circuit breaker.
How to reset the filter light on a Samsung microwave?
After you have cleaned or replaced the grease filter on your Samsung microwave, you can reset the filter light by following these steps:
- Press and hold the 0 button on the keypad for 3 seconds. The filter light will turn off and beep twice to confirm that the filter timer has been reset.
- If you have a touch screen display, tap Settings > Filter Reset > OK. The filter light will turn off and beep twice to confirm that the filter timer has been reset.
You have successfully reset the filter light on your Samsung microwave. You can now enjoy using your microwave without worrying about its performance and safety.
FAQs
Q: How often should I clean or replace the grease filter on my Samsung microwave?
A: You should clean or replace the grease filter on your Samsung microwave every 300 hours of use, or about every 6 months, depending on how often you use your microwave. You can also check the condition of the filter regularly and clean or replace it as needed.
Q: What are some signs that my grease filter needs to be cleaned or replaced?
A: Some signs that your grease filter needs to be cleaned or replaced are:
- The filter light is on
- The microwave makes more noise than usual
- The microwave takes longer to heat up food
- The food smells bad or tastes different
- There is smoke or sparks coming from the microwave
Q: Can I use any type of grease filter for my Samsung microwave?
A: No, you should only use a compatible grease filter for your Samsung microwave model. Using an incompatible or generic filter can damage your microwave and void your warranty. You can find out which type of grease filter you need by checking your user manual or contacting Samsung customer service.
