When Your GE Freezer Stops Working, but the Fridge is Fine: Troubleshooting Tips

Have you ever opened your fridge and found that your food is not as cold as it should be, but your freezer is still working fine? This can be a frustrating and puzzling situation, especially if you have a GE refrigerator-freezer combo. What could be causing this problem, and how can you fix it?

The most common reasons why your GE freezer is cold but the fridge is not are dirty or frosty coils, a faulty evaporator fan motor, or a problem with the control board or settings.

How to Clean or Defrost the Coils

One potential reason your GE freezer is cold but refrigerator is not is overstuffing. Overstuffing can cause problems if you have too much food in your refrigerator. Too many items will block the vents that allow cold air to circulate. This can also prevent the defrost system from working properly, leading to frost buildup on the coils.

To fix this, you should remove some items from your refrigerator and freezer and make sure there is enough space for air to flow. You should also check the coils behind or underneath your refrigerator and clean them if they are dirty or dusty. Dirty coils can reduce the efficiency of your refrigerator and make it harder to cool down.

If the coils are frosty, you may have a defrost problem. Frost can accumulate on the evaporator coils if the defrost system fails, and your refrigerator will struggle to stay cold. A GE appliance repair professional will need to replace these parts if they fail:

• Defrost heater: This is an electric coil that melts the frost on the coils during the defrost cycle.
• Defrost thermostat: This is a sensor that monitors the temperature of the coils and turns on or off the heater as needed.
• Defrost timer or control board: This is a device that controls how often and how long the defrost cycle runs.

How to Test the Evaporator Fan Motor

Another potential reason for your GE freezer is cold, but the refrigerator is not is a faulty evaporator fan motor. The evaporator fan motor is responsible for circulating air throughout the freezer compartment. If the motor is not working properly, the air will not circulate properly.

To test the evaporator fan motor, you will need to disconnect the power to your refrigerator and remove the panel inside the back of the freezer compartment. You should see the fan blade and motor behind it. You can try spinning the blade by hand and see if it moves freely. If it does not, you may need to replace the motor.

You can also use a multimeter to check for continuity in the motor wires. If there is no continuity, the motor is defective and needs to be replaced.

How to Check the Control Board or Settings

The last possible cause of your GE freezer being cold but fridge not cooling is a problem with the control board or settings. The control board is an electronic device that regulates the temperature and functions of your refrigerator. If it is malfunctioning, it may not send the correct signals to the compressor, fan, or defrost system.

To check the control board, you will need to locate it on your refrigerator. It may be behind a panel on the back, inside the fresh food compartment, or on the exterior dispenser control panel. You will need to inspect it for any signs of damage, such as burns, cracks, or corrosion. If you see any damage, you will need to replace the control board.

You should also check your temperature settings and make sure they are not too high or too low. The normal settings for most GE models are 0 and 37 degrees Fahrenheit for the freezer and fresh food compartments respectively. You can adjust them by pressing the buttons on the control panel or turning the dial inside the compartments.

FAQs About GE Freezer Not Working But Fridge Is Fine

Here are some frequently asked questions about GE freezer not working but fridge is fine and their answers:

• How do I reset my GE refrigerator? You can try resetting your GE refrigerator by unplugging it from the power source for about 10 minutes and then plugging it back in. This may clear any errors or glitches in the control board and restore normal operation.
• What should I do if my GE refrigerator is not cooling at all? If your GE refrigerator is not cooling at all, both in the freezer and fresh food compartments, you may have a problem with the compressor, condenser fan, start relay, or capacitor. These are complex and dangerous components that require professional diagnosis and repair.
• How do I prevent my GE freezer from freezing up? You can prevent your GE freezer from freezing up by keeping it clean, avoiding overstuffing it, checking for door seal leaks, and setting it at an optimal temperature. You should also perform regular maintenance on your refrigerator, such as cleaning the coils, replacing the water filter, and checking the defrost system.

Conclusion

Your GE freezer is cold but fridge is not cooling can be a frustrating problem, but it can be fixed with some troubleshooting and repair. By following the tips in this post, you can identify and resolve the most common causes of this issue and enjoy your refrigerator again.

We hope this post has helped you troubleshoot your GE freezer not working but fridge is fine problem. If you have any questions or comments, feel free to leave them below. And don’t forget to share this post with your friends who might find it useful!