To remove the top freezer drawer from a Whirlpool refrigerator, you need to open the freezer door, pull out the drawer handle, lift up the drawer slightly, and slide it out of the track. Then, you need to disconnect the wires, unscrew the metal strip, and pull out the drawer completely.
The first step is to open the freezer door and locate the top freezer drawer near the top of the appliance. Pull out on the drawer handle to unlock it from its track. You should hear a click when it is released.
Next, you need to lift up the drawer gently as you pull it forward. Be careful not to drop it or damage it, as it can be heavy when full. You might need someone to help you support it from both sides. As you lift up the drawer, you should be able to slide it out of the track.
Once you have slid out the drawer, you need to disconnect the wires that connect it to the refrigerator. To do this, take off the plastic cap located at the end of each wire and pull out the wires gently. Put them aside in a safe place. Then, locate the two metal screws at the bottom of the freezer drawer and take them out with a screwdriver. Remove the metal strip that holds the drawer in place.
Finally, you can pull out the drawer completely and check whether it is empty or not. You can now clean it or replace it as needed. To put it back, just reverse the steps above.
To remove the bottom freezer basket from a Whirlpool refrigerator, you need to lift up on both sides of the basket and pull it out of its rails.
To adjust the freezer drawer on a Whirlpool refrigerator, you need to loosen or tighten the screws on both sides of the drawer until it is aligned with the door.
To defrost your Whirlpool refrigerator, you need to turn off the power and let it sit for several hours until all ice melts. Then, wipe off any water or frost with a cloth and turn on the power again.
Removing the top freezer drawer from a Whirlpool refrigerator is not as hard as it seems. You just need to follow these four steps: open the freezer door and pull out the drawer handle, lift up the drawer slightly and slide it out of the track, disconnect the wires and unscrew the metal strip, and pull out the drawer completely. Now you can clean or replace your freezer drawer easily.