How To Reset The Board In A Whirlpool Top Freezer And When To Do It

• The freezer is not cold enough or has warm spots
• The freezer is making loud or unusual noises
• The freezer is running constantly or cycling on and off frequently
• The freezer has frost or ice build-up on the back panel or around the coils
• The freezer is not making ice or dispensing water

But how do you reset the board in a Whirlpool top freezer and when should you do it? In this post, we will show you how to reset the board in a Whirlpool top freezer and when to do it with some easy steps and tips.

What You Need To Reset The Board In A Whirlpool Top Freezer

Before you reset the board in your Whirlpool top freezer, make sure you have the following items:

• Access to the power cord and the outlet of your freezer
• Access to the control panel of your freezer, which is usually located on the top of the refrigerator section
• A towel or a rag to protect the floor and catch any drips
• A flashlight or a lamp to see inside the freezer

How To Reset The Board In A Whirlpool Top Freezer: Step By Step

Once you have everything ready, follow these steps to reset the board in your Whirlpool top freezer:

1. Unplug the freezer or turn off the circuit breaker that powers it. This is important for your safety and to prevent any damage to the appliance.
2. Open the freezer door and remove any food items that may spoil or melt while the freezer is off. You may also want to remove any ice bins or trays to prevent water leakage.
3. Press and hold the reset button on the control panel for 10 seconds or until you hear a beep. The reset button is usually labeled as “Reset” or “Filter Reset” and may have an icon of a water drop or a filter. If you can’t find the reset button, you can also try pressing and holding both the door switches and the refrigerator temperature button for 10 seconds until you see an “s” displayed on the panel of the freezer section.
4. Plug in the freezer or turn on the circuit breaker and wait for it to start running. You may hear some clicking or humming sounds as the freezer resets itself.
5. Check if the freezer is working properly by listening for any unusual noises, feeling for any cold air coming out of the vents, checking for any frost build-up on the back panel or around the coils, and testing if the ice maker or water dispenser are working.

When To Reset The Board In A Whirlpool Top Freezer

You should reset the board in your Whirlpool top freezer whenever you experience any of the issues mentioned above, such as:

• The freezer is not cold enough or has warm spots
• The freezer is making loud or unusual noises
• The freezer is running constantly or cycling on and off frequently
• The freezer has frost or ice build-up on the back panel or around the coils
• The freezer is not making ice or dispensing water

You should also reset the board in your Whirlpool top freezer after a power outage, a voltage surge, or a repair service. This can help you restore the normal function of your freezer and prevent any further problems.

FAQs About Resetting The Board In A Whirlpool Top Freezer

Here are some common questions and answers about resetting the board in a Whirlpool top freezer:

• Will resetting my Whirlpool top freezer erase my settings?
  • No, resetting your Whirlpool top freezer will not erase your settings, such as the temperature, the ice maker mode, or the water filter status. However, if you want to change your settings after resetting your freezer, you can do so by using the control panel buttons.
• How often should I reset my Whirlpool top freezer?
  • There is no specific rule on how often you should reset your Whirlpool top freezer, but generally, you should only do it when necessary. Resetting your freezer too often can cause more harm than good, as it can disrupt the normal operation of your appliance and cause more wear and tear. Only reset your freezer when you encounter any of the issues mentioned above, or after a power outage, a voltage surge, or a repair service.
• What if resetting my Whirlpool top freezer does not fix my problem?
  • If resetting your Whirlpool top freezer does not fix your problem, there may be something else wrong with your appliance that requires professional attention. You should contact Whirlpool customer service or an authorized service center for further assistance. Do not attempt to repair your freezer yourself, as this can void your warranty and cause more damage.

Conclusion

Resetting the board in your Whirlpool top freezer can help you solve some common issues and restore the normal function of your appliance. By following the steps in this post, you can reset your Whirlpool top freezer easily and safely. However, if resetting your freezer does not fix your problem, you should contact Whirlpool customer service or an authorized service center for further assistance.