If you have a Whirlpool Wrx988Sibm refrigerator, you might need to remove the freezer drawer for cleaning, organizing, or repairing purposes. But do you know how to do it safely and easily? If not, don’t worry, we’re here to help you with this quick guide.
To remove the freezer drawer from a Whirlpool Wrx988Sibm refrigerator, you need to locate the two locking tabs on either side of the drawer and press them in with your fingers to unlock it. Then, pull the drawer straight out until it separates from its track.
The first step is to locate the two locking tabs on either side of the drawer. The locking tabs are small plastic pieces that secure the drawer to its track. You can find them behind the front panel of the drawer, near the corners.
Before you touch the locking tabs, make sure you unplug the refrigerator and turn off the power at the electrical outlet. This will prevent any electric shock or damage to your appliance.
The next step is to press the locking tabs in with your fingers to unlock the drawer. You may need to use some force to do this, but be careful not to break them. You should hear a click when they are unlocked.
The last step is to pull the drawer straight out until it separates from its track. The track is a metal rail that guides the drawer in and out smoothly. To pull out the drawer, you need to grasp it by both sides and slide it forward. Do not tilt or twist the drawer, as this may damage it or cause it to jam.
Once you have pulled out the drawer, you can set it aside on a flat surface or a towel. Be careful not to drop or scratch it.
Removing your freezer drawer matters because it allows you to access and clean the inside of your freezer compartment. This can improve your food safety and hygiene, as well as extend the life of your refrigerator.
You should remove and clean your freezer drawer periodically or whenever you notice any dirt, dust, ice, or food spills inside. You should also remove and inspect your freezer drawer if you experience any problems with its function or performance.
Q: How do I reinstall the freezer drawer in a Whirlpool Wrx988Sibm refrigerator?
A: To reinstall the freezer drawer, you need to do the opposite of what you did to remove it. That is, align the drawer with its track and push it in until it locks into place. You should hear a click when it’s secured.
Q: How do I clean the freezer drawer in a Whirlpool Wrx988Sibm refrigerator?
A: To clean the freezer drawer, you need to follow these steps:
Q: How do I adjust or replace a shelf or shelf frame in a Whirlpool Wrx988Sibm refrigerator?
A: To adjust or replace a shelf or shelf frame in a Whirlpool Wrx988Sibm refrigerator, you need to follow these steps: